• A copy of the original Windows XP CD or ISO
  
• The latest version SP2
  
• The boot file which you can download Here
  
• Nero
  

Ok, first off start by Creating a folder called XP on your hard drive (I used C: drive in this guide). A minimum of 800MB is required. In XP folder, create three sub-folder called CD-ROOT, XP-BOOT, and XP-SP2. You should have something like this when your done.



Copy the entire Windows XP CD (or extract a image "ISO") into folder CD-ROOT.

Copy your Service Pack 2 (SP2) file into C:\XP

Rename the Service Pack file to XP-SP2.EXE

Extract the Service Pack from the Run Dialog using the command:

C:\XP\XP-SP2.EXE -U -X:C:\XP\XP-SP2




Apply the Service Pack 2 (SP2) to the Windows XP in CD-ROOT using the following command from the Run Dialog:

C:\XP\XP-SP2\i386\UPDATE\UPDATE.EXE -S:C:\XP\CD-ROOT









Start Nero.

Select File > New... from the menu.

Most of the time, the Nero Wizard will start, if this happens click the "Close Wizard" button.

1. Select CD-ROM (Boot)
2. Select Image file from Source of boot image data
3. Set Kind of emulation: to No Emulation
4. Set Load segment of sectors (hex!): to 07C0
5. Set Number of loaded sectors: to 4
6. Press the Browse... button

Select All Files (*.*) from File of type:

Locate the Boot-Sector file (boot.bin) in the folder C:\XP\XP-BOOT

Set File-/Directory length to ISO Level 1 (Max. of 11 = 8 + 3 chars)
Set Format to Mode 1
Set Character Set to ISO 9660
Check all Relax ISO Restrictions

Select ISO9660 from the drop down box.
Enter the Volume Label as WB2PFRE_EN
Enter the System Identifier as WB2PFRE_EN
Enter the Volume Set as WB2PFRE_EN
Enter the Publisher as MICROSOFT CORPORATION
Enter the Data Preparer as MICROSOFT CORPORATION
Enter the Application as WB2PFRE_EN

Select Use the date and time from the original file from File Dates 

Check Write
Check Finalize CD (No further writing possible!)
Set Write Method to Track-At-Once

Locate the folder C:\XP\CD-ROOT
Select everything in the folder and drag it to the ISO compilation panel.
Click the Write CD Dialog button.

Click the Write button

Wait for CD compilation to finish.

Click OK when burning is complete.

That's it done, simple. If you have any problems, please post them on the forums.